Machined Parts

Centerlink / Steering Foot Slug (Tapered Hole) Multiple Sizes Available Please note: Quantity of one equals one slug (not a pair).

Lower Control Arm Rear Window Slug (Laser Engraved for Identification) Please note: Quantity of one equals one slug (not a pair).

Upper Control Arm / A-Plate Slug (Engraved for Identification) Please note: Quantity of one equals one slug (not a pair).

Lower Control Arm Front Slug (Engraved for identification) Please note: Quantity of one equals one slug (not a pair).

Spindle Upper Slug (Tapered Hole) Reamed for Upper Ball Joint Please note: Quantity of one equals one slug (not a pair).

Made from aluminum and designed to be used with COM12 monoball bearings.  3/4" bore x 1-1/8" long.

Steel housing made for COM12 monoball bearings. Housing is 1.735" OD x 2" long, bearing is centered within housing. Quantity discounts available: ...

Made from aluminum and designed to be used with COM12 monoball bearings, reducing to a 1/2" bore.  Available in four different offsets, see diagram...

Extends height of slug 1/2", made for 3/4" wide slots.

Truck trailing arm lowering block. 1 inch and 1/2 inch zero degree spacers. 

Slots are on 6" centers for all versions.  Three different vertical centerline slot heights available: X =  1-13/16" 3-1/16" 3-9/16"

Made from carbon steel and designed for a 5/8" countersink bolt; sleeve is 1-3/8" diameter x 1-1/8" long. Quantity discounts available: 3–10 = 5% ...

Made from carbon steel and designed for a 3/4" diameter hole.  Flange diameter is 0.975" x 0.125" thick, length under flange is 1". Quantity discou...

Made from carbon steel and designed to be used with Timken LL52510 tapered roller bearing cups with a 1.6563" diameter and RRC bearing seals with a...

Made from carbon steel and designed for 1-1/8" outside diameter x 0.065" thick wall tube.  Bung with left hand threads has an indication stripe. Qu...

Over engine bar mount: 1" diameter x 1.575" long, made from carbon steel and designed to fit our bay bar insert:  Bay Bar Threaded Insert — RRC Qua...

90 deg countersink with 3/8"-24 threads, 2" overall length; made from carbon steel. Quantity discounts available: 3–10 = 5% off 11–24 = 10% off 25...

5" Center to Center 5/8-18 Thread  Made for GM Steering Box