Machined Parts

Centerlink / Steering Foot Slug (Tapered Hole) Multiple Sizes Available Please note: Quantity of one equals one slug (not a pair).

Lower Control Arm Rear Window Slug (Laser Engraved for Identification) Please note: Quantity of one equals one slug (not a pair).

Upper Control Arm / A-Plate Slug (Engraved for Identification) Please note: Quantity of one equals one slug (not a pair).

Lower Control Arm Front Slug (Engraved for identification) Please note: Quantity of one equals one slug (not a pair).

Spindle Upper Slug (Tapered Hole) Reamed for Upper Ball Joint Please note: Quantity of one equals one slug (not a pair).

Made from aluminum and designed to be used with COM12 monoball bearings.  3/4" bore x 1-1/8" long.

Steel housing made for COM12 monoball bearings. Housing is 1.735" OD x 2" long, bearing is centered within housing. Quantity discounts available: ...

Made from aluminum and designed to be used with COM12 monoball bearings, reducing to a 1/2" bore.  Available in four different offsets, see diagram...

Extends height of slug 1/2", made for 3/4" wide slots.

Truck trailing arm lowering block. 1 inch and 1/2 inch zero degree spacers. 

Slots are on 6" centers for all versions.  Three different vertical centerline slot heights available: X =  1-13/16" 3-1/16" 3-9/16"

Weighing in at just 6.9lbs, this rotor is 14.6% lighter than stock.  11.75" diameter x 0.81" wide, 8 x 7.00 rotor bolt circle, plain face.

Made from aluminum, tube is 3-1/4" long with a clearance hole for 3/8" bolt.

Made from carbon steel and designed for a 5/8" countersink bolt; sleeve is 1-3/8" diameter x 1-1/8" long. Quantity discounts available: 3–10 = 5% ...

Made from carbon steel and designed for a 3/4" diameter hole.  Flange diameter is 0.975" x 0.125" thick, length under flange is 1". Quantity discou...

Made from carbon steel and designed to be used with Timken LL52510 tapered roller bearing cups with a 1.6563" diameter and RRC bearing seals with a...

Made from carbon steel and designed for 1-1/8" outside diameter x 0.065" thick wall tube.  Bung with left hand threads has an indication stripe. Qu...

Over engine bar mount: 1" diameter x 1.575" long, made from carbon steel and designed to fit our bay bar insert:  Bay Bar Threaded Insert — RRC Qua...

90 deg countersink with 3/8"-24 threads, 2" overall length; made from carbon steel. Quantity discounts available: 3–10 = 5% off 11–24 = 10% off 25...

Brake Adapter Wide 5 Only Howe# 34050

5" Center to Center 5/8-18 Thread  Made for GM Steering Box

Billet Aluminum String Bars make aligning your Late Model Chassis easy. Front and Rear String Bars are machined in house to thread into your RRC an...

Steel Rear End Weld on Serrate Track Bar Mount